9 Best High Torque DC Motors 12V/24V for 2024

When it comes to mechanical systems, high-torque DC motors are essential components for driving efficiency and power in a range of applications. Whether you’re building a robot, a car, or a piece of automation equipment, choosing the right motor can greatly influence the performance of your machine.

In this article, we’ll review the 9 best high-torque DC motors available in 12V and 24V configurations for 2024. These motors are known for their impressive power outputs, high efficiency, and versatile applications. We will also explore their key features, advantages, and the best use cases for each motor.

Let’s dive in!


Table of Contents

  1. Introduction to High Torque DC Motors
  2. How to Choose the Right High Torque DC Motor
  3. 9 Best High Torque DC Motors 12V/24V
      1. TSL-DC12V2225 (22mm DC Motor – 25mm Type Model)
      1. TSL-GM50T-ST (24V DC Gear Motor)
      1. TSL-BLDC4235 (42mm 12 Volt BLDC Motor)
      1. Mabuchi FK-180SH-21900 (High Torque 12V Motor)
      1. BaneBots RS775 (High Torque 12V Motor)
      1. Maxon EC-i 40 (24V BLDC Motor)
      1. Kollmorgen AKM Series (12V/24V BLDC Motor)
      1. Crouzet DC Motor 12V (High Torque Gear Motor)
      1. Portescap 22DCT (High-Torque Brushless DC Motor)
  4. Applications of High Torque DC Motors
  5. FAQs on High Torque DC Motors
  6. Conclusion

1. Introduction to High Torque DC Motors

1. Introduction to High Torque DC Motors

A high torque DC motor is a type of motor that produces a significant amount of rotational force (torque) at a relatively low speed. These motors are used in a wide range of applications where high power output is required for small to medium machines, such as robotics, electric vehicles, and industrial automation.

DC motors, in general, are known for their ability to provide precise control over speed and direction. High torque motors specifically are designed to handle greater mechanical loads without slowing down or losing efficiency. Torque is the measure of a motor’s ability to do work, and in high-torque motors, this is especially important when powering larger systems or performing heavy-duty tasks.

In high-torque applications, selecting the right motor means taking into account its voltage, current, speed, power output, and efficiency. In this article, we will focus on 12V and 24V DC motors, which are ideal for most consumer and industrial applications.


2. How to Choose the Right High Torque DC Motor

Choosing the right high-torque DC motor for your project involves evaluating the following key factors:

Voltage

The voltage of the motor affects its power output. Motors come in a variety of voltages, such as 12V and 24V, and the selection depends on your power requirements. Higher voltage motors tend to provide more torque and greater efficiency.

Torque Output

Torque is a critical factor, especially for applications that require motors to handle heavy loads. High-torque DC motors are specifically designed to deliver more rotational force, which is essential in industrial and robotics applications.

Speed

The speed at which the motor operates is also important. It’s often specified as revolutions per minute (RPM). Depending on your application, you may need a motor with a higher RPM for faster operations, or a lower RPM for more controlled movements.

Efficiency

Efficiency refers to how effectively the motor converts electrical energy into mechanical energy. A higher efficiency motor consumes less power and generates less heat.

Size and Weight

Depending on the available space in your application, the size and weight of the motor may be significant factors. Compact, lightweight motors are easier to integrate into small machines, while larger motors may be more appropriate for heavier tasks.


3. 9 Best High Torque DC Motors 12V/24V

Let’s now take a closer look at the 9 best high torque DC motors for 12V/24V systems, highlighting their key features and performance.

1. TSL-DC12V2225 (22mm DC Motor – 25mm Type Model)

1. TSL-DC12V2225 (22mm DC Motor - 25mm Type Model)
22mm DC Motor − 25mm Type Model丨TSL-DC12V2225

This 12V DC motor from TSL offers high efficiency and impressive torque output. It is commonly used in applications that require moderate torque at relatively high speeds.

Key Features:

  • Voltage: 12V
  • No-load Speed: 10,000 RPM
  • Stall Torque: 12.22 mNm
  • Load Torque: 2.0 mNm
  • Max Output Power: 3.27W
  • Efficiency: 85.4%
  • Weight: 36g

Why Choose It:

  • Compact size, ideal for small machinery or robotic applications.
  • High efficiency for longer operating times.
  • Good balance between speed and torque.

2. TSL-GM50T-ST (24V DC Gear Motor)

2. TSL-GM50T-ST (24V DC Gear Motor)
24 V DC Gear Motor丨TSL-GM50T-ST

This 24V DC gear motor is perfect for applications requiring robust power and stability. The gear mechanism provides an extra boost to the motor’s torque capabilities, making it suitable for high-load tasks.

Key Features:

  • Voltage: 24V
  • Rated Voltage: 6V/12V/24V
  • Heavy-duty gear mechanism
  • Customizable speed options
  • Used in robots, intelligent machines, and more

Why Choose It:

  • Provides enhanced torque through gears.
  • Ideal for heavy-duty industrial applications.
  • Customizable voltage settings.

3. TSL-BLDC4235 (42mm 12 Volt BLDC Motor)

3. TSL-BLDC4235 (42mm 12 Volt BLDC Motor)
42mm 12 Volt Motor − 35mm Type Mode l TSL-BLDC4235

This BLDC motor is a high-performance 12V motor that delivers both high torque and efficiency. Its brushless design ensures long-lasting reliability and minimal maintenance.

Key Features:

  • Voltage: 12V
  • Rated Speed: 5387 RPM
  • Output Torque: 321 g·cm
  • Output Power: 14.7W
  • Efficiency: High
  • Shaft Diameter: 5.0 mm

Why Choose It:

  • Brushless design for longer life.
  • High output power and torque for demanding applications.
  • Smooth operation with reduced friction.

4. Mabuchi FK-180SH-21900 (High Torque 12V Motor)

The Mabuchi FK-180SH-21900 is a well-known high-torque motor, delivering impressive performance in both hobbyist and industrial projects. Its durability and strong torque make it a favorite for small robots, DIY projects, and more.

Key Features:

  • Voltage: 12V
  • No-Load Speed: 19,000 RPM
  • Torque Output: Moderate
  • Size: Compact and efficient

Why Choose It:

  • Affordable yet powerful.
  • Reliable and easy to integrate into DIY projects.
  • Works well in robots and small machines.

5. BaneBots RS775 (High Torque 12V Motor)

The BaneBots RS775 is a robust high-torque motor known for its longevity and consistent performance in demanding applications. It delivers excellent torque at low speeds, making it suitable for various mechanical systems.

Key Features:

  • Voltage: 12V
  • Torque Output: High
  • Efficiency: Excellent
  • Durability: Long-lasting

Why Choose It:

  • Highly durable and reliable for continuous operation.
  • Excellent choice for industrial and automotive applications.
  • Robust torque and low-speed performance.

6. Maxon EC-i 40 (24V BLDC Motor)

The Maxon EC-i 40 is a 24V brushless DC motor that is known for its high efficiency and low maintenance. This motor is ideal for applications requiring a high level of precision and power, such as medical devices and robotic systems.

Key Features:

  • Voltage: 24V
  • Torque Output: High
  • Efficiency: Very high
  • Applications: Robotics, medical devices

Why Choose It:

  • Extremely efficient and reliable.
  • Compact design, ideal for precision equipment.
  • Long lifespan with minimal maintenance.

7. Kollmorgen AKM Series (12V/24V BLDC Motor)

The Kollmorgen AKM Series motors are highly regarded for their high torque and precision control. They are perfect for industrial applications, particularly for robotics and automation systems.

Key Features:

  • Voltage: 12V or 24V
  • Torque Output

: Very high

  • Brushless Design
  • Precision Control

Why Choose It:

  • Excellent precision and torque output.
  • Ideal for industrial automation.
  • Brushless motor with long-lasting reliability.

8. Crouzet DC Motor 12V (High Torque Gear Motor)

The Crouzet DC Gear Motor offers exceptional performance for high-torque, low-speed applications. It is commonly used in industrial machinery, conveyor belts, and other heavy-duty tasks.

Key Features:

  • Voltage: 12V
  • Gear Mechanism: Enhances torque
  • Applications: Industrial machinery

Why Choose It:

  • Excellent for heavy-duty tasks.
  • Gear mechanism boosts torque capabilities.
  • Durable and reliable for long-term use.

9. Portescap 22DCT (High-Torque Brushless DC Motor)

The Portescap 22DCT is a high-performance brushless DC motor that delivers incredible torque in a compact package. It’s designed for demanding applications, including robotics and medical devices.

Key Features:

  • Voltage: 12V/24V
  • Torque Output: High
  • Brushless Design
  • Compact

Why Choose It:

  • High torque with a compact design.
  • Reliable for precision tasks.
  • Low maintenance, brushless technology.

4. Applications of High Torque DC Motors

High-torque DC motors are used in a wide range of industries and applications, including:

  • Robotics: For precise movement and force.
  • Electric Vehicles: For driving wheels and heavy-duty machinery.
  • Industrial Equipment: Conveyor belts, automation systems, and machinery.
  • Medical Devices: For motors requiring precision control.
  • Hobby Projects: DIY robots, RC cars, and other mechanical systems.

5. FAQs on High Torque DC Motors

1. What’s the difference between a brushed and brushless DC motor?

Brushed DC motors have brushes that wear over time, whereas brushless DC motors use permanent magnets and require less maintenance.

2. How do I calculate the required torque for my application?

Torque depends on the load the motor is expected to move, the speed required, and the mechanical properties of the system.

3. Can I use a 24V motor in a 12V system?

No, a 24V motor should only be used with a 24V power supply. Using it with 12V will result in reduced performance.


6. Conclusion

High-torque DC motors are essential for powering machines and systems requiring significant rotational force. By selecting the right motor, whether it’s a 12V or 24V DC motor, you can ensure the smooth operation of your equipment. The motors listed above represent some of the best high-torque options available in 2024, offering a variety of performance levels, from compact models for robotics to powerful motors for industrial use.

When choosing a motor, consider factors such as voltage, torque output, efficiency, and intended application. The best motor for your needs will depend on balancing these parameters for optimal performance.

Share your love